42300 WIRE MIG 003 MILD STL

Description

Overview

Forney E71T-GS Flux-Core MIG Wire (42300) is designed for all-position wire welding on mild steel, with particular suitability for single-pass applications requiring high travel speed.

Technical Features

• Self-shielded flux core construction eliminates the requirement for an external shielding gas cylinder, reducing setup time and equipment costs in the field.
• All-position welding capability (E71T-GS classification) supports flat, horizontal, vertical, and overhead weld orientations, increasing job-site versatility.
• Rated for single-pass applications at high travel speed delivers efficient deposition on production runs where throughput is a priority.
• Runs hotter than solid wires improves fusion and penetration characteristics on applicable base metals without requiring process changes.
• Compatible with rusty, dirty, and painted base material reduces the need for extensive pre-weld surface preparation, saving preparation time.
• Optional Argon/CO2 shielding gas compatibility while no gas is required, use of an Argon/CO2 mix is documented to reduce spatter when conditions permit.
• 79,000 PSI tensile strength meets structural performance requirements for mild steel single-pass weld joints.
• Suitable for 18-gauge mild steel or thicker provides a defined minimum material thickness guideline for consistent weld quality.

Applications

• All-position MIG (GMAW) welding on mild steel structures and fabrications
• Outdoor and windy job-site conditions where shielding gas retention is unreliable
• Single-pass welds on 18-gauge mild steel sheet and heavier stock
• Repair and maintenance welding on surfaces with rust, mill scale, paint, or contamination
• High-travel-speed production welding applications

California Residents: See Prop 65 WARNING Cancer & Reproductive Harm. Wash hands after use. Visit P65Warnings.ca.gov for more information.