Description
| Dimensions In Inches | ||||
| A | B | C | D | E |
| 1/4″ | 0.25 | 0.41 | 0.45 | 1.66 |
| 5/16″ | 0.31 | 0.44 | 0.5 | 1.91 |
| 3/8″ | 0.38 | 0.53 | 0.56 | 2.28 |
| 1/2″ | 0.5 | 0.69 | 0.66 | 2.84 |
| 5/8″ | 0.63 | 0.84 | 0.84 | 3.53 |
| 3/4″ | 0.75 | 1 | 0.97 | 4.31 |
| 7/8″ | 0.88 | 1.19 | 1.13 | 5 |
| 1″ | 1 | 1.38 | 1.25 | 5.69 |
| 1 1/4″ | 1.06 | 1.5 | 1.5 | 6.91 |
Turnbuckles are used foradjusting the tension oflengths of ropes, cables, tie rodsand other tensioning systems. It comes in a variety of ends that could be the same or a combination ofdifferent ends. Those ends thread into a body which is left hand and right hand. The tension can be adjusted by rotating the body which will draw the ends into the body.
According to A.S.T.M. F 1145. Hot galvanized, drop forged. Bodies normalized; end fittings quenched and tempered.
**Sizes up to 2 3/4 in diameter and 24″ in length**
Reviews
There are no reviews yet.